Description:

Boasting enhanced stability for temperature sensing and compensation circuits, the SMD NTC thermistors from Vishay are optimized for heat counters, body thermometers, and other medical applications.

The thermistors provide precise measurements over a wide temperature range of -40 °C to +125 °C, and feature non-standard R25 values that are adapted to the resistivity of the thermistors' stable ceramic material and case dimensions. This last feature preserves the devices' original electrical properties throughout their lifetime for increased accuracy. The devices have an ultra-low ± 0.5% maximum variation in their initial electrical resistance values at +25 °C (R25) after 10,000 hours of operation over the full temperature range.

The devices provide one R25 value per case in the 0402, 0603, and 0805 case sizes. The devices' high R25values from 100 kΩ to 210 kΩ reduce self-heating effects, which could result in false temperature readings.

Description:

Silicon Labs has today announced its second-generation relative humidity and temperature sensing solution, the Si701x/2x sensors. The new sensors simplify RH sensing designs while providing industry-leading power efficiency and ease of use. Target applications include accurate RH sensing for home automation, HVAC, refrigeration, healthcare, remote monitoring, automotive and industrial equipment.

The Si701x/2x family can be used in conjunction with Silicon Labs’ broad portfolio of energy-friendly microcontrollers and wireless ICs to enable best-in-class solutions for measuring, controlling and reporting environmental conditions for a wide range of connected devices linked to the Internet of Things.

Mark Thompson, vice president and general manager of Silicon Labs’ Access, Power and Sensor products, comments: “The new Si701x/2x family represents the state of the art in RH sensing, offering an unmatched combination of ultra-low power, ease of use, small size, precision, reliability and compatibility with standard manufacturing flows. As the only single-chip RH/temperature sensing solutions offered by a broad-based semiconductor supplier, the Si701x/2x sensors can be combined with Silicon Labs’ energy-friendly MCUs, ZigBee and sub-GHz wireless ICs, and other sensor products to address wireless sensing applications for the Internet of Things.”

Combining a standard CMOS mixed-signal IC with a proven technique of measuring humidity using a polymer dielectric film, the Si701x/2x devices provide a superior alternative to legacy RH sensing approaches, which use discrete resistive or capacitive RH sensing elements along with analog circuits for temperature compensation and signal conditioning. Often necessitating a bigger bill of materials and PCB area, these discrete solutions typically have a high risk of contamination and low reliability. Incompatible with surface-mount technology, RH/temperature calibration must be performed during PCB assembly. Attempting to solve these challenges, RH sensor module suppliers have resulted in a higher system cost without improving reliability or risk of contamination.

Contrasting the complex discrete approaches, the monolithic Si701x/2x ICs provide the highest ease of use and reduced manufacturing cost and complexity. Fully calibrated and SMT compatible, the Si701x/2x family achieves highest long-term reliability (thanks to the integrated CMOS design) and also requires negligible BOM cost. Protection against contamination is offered by an optional filter cover, in addition to the factory-installed cover (a Teflon membrane sealed at the top of the IC). This factory-installed cover protects the sensor throughout the device’s entire lifetime, shielding the sensing element from dust, dirt and cleaning agents during operation.

Featuring the lowest power consumption in the integrated RH/temperature sensor market, the Si701x/2x sensors have a 3.3 V power supply voltage and 8-bit resolution, while consuming only 1.9 µW average on-chip power when taking one sample per second. Up to six times lower power than competing RH sensors, this energy efficiency makes the sensors ideally suited for power-sensitive applications and helps extend battery life.

Providing best-in-industry RH sensing precision, the Si701x/2x family is ideal for a majority of RH and temperature sensing applications that have stringent accuracy requirements. Operating over a temperature range from -10°C to +85°C, superior long-term RH accuracy is ensure with the lowest long-term RH drift at <0 .25="" 0="" 80="" a="" accuracy="" also="" and="" from="" humidity="" maintain="" maximum="" of="" operating="" over="" p="" per="" range.="" range="" rh="" sensors="" temperature="" the="" to="" wide="" year.="">

Description:

Murata has announced that it will soon commence production of a range of surface-mounted NTC (Negative Temperature Coefficient) sensors, packaged on a Flexible Printed Circuit (FPC) film. Easily routed inside complex designs and tight spaces, the devices feature an FPC thickness of approximately 100µm.

The sensors’ low heat capacity ensure excellent thermal responsiveness. The sensors measure 50.00x3.17x0.55mm, making them suitable for determining the housing temperature of smartphones and tablets and for use in wearable products which monitor body surface temperature, such as fitness bands and sports performance monitors.

The FTNT55XH103FA1A050 sensor can measure temperatures in the range of -40 to +125°C. At 25°C, it boasts an accuracy of ±0.4°C and resistance of 10kΩ ±1%.

With smartphones and tablets becoming increasingly compact, with more sophisticated functions, the thermal design needs to be monitored in space-constrained designs. Additionally, the IoT trend of wearable products is gaining popularity, and the low-profile film temperature sensors' size and sensitivity suits use in these applications.

Description:

Emergency Luminaire Control, dimming load transfer, 277V 60Hz, 20A ballast, general purpose, 1500W incandescent, 20A solid state/magnetic transformer

Description:

The Acer Aspire Switch 10 thinks so. With smooth switches between its four modes, a latch-less detachable hinge, bright touch screen and speedy Intel quad-core performance, you will be inclined to agree.

Description:

• 18.0 MP CMOS sensor and DIGIC 4 Image Processor for high image quality and speed
• ISO 100 - 6400 for shooting from bright to dim light
• Vari-angle 3.0-inch Clear View LCD monitor (3:2) for shooting at high or low angles and 1,040,000-dot VGA with reflection reduction
• Video Snapshot features for enhanced video shooting options
• Comes with camera body, EF-S 18-55mm f/3.5-5.6 IS Type II lens, eyecup, wide strap, USB cable, AV cable, battery, and charger

Description:

The Magician Chassis is our latest robot platform from Dagu. It features two gearmotors with 65mm wheels and a rear caster. The chassis plates are cut from acrylic with a wide variety of mounting holes for sensors, controllers, power, etc. Simply bolt the two pre-cut platforms together, attach the motors and caster and add your favorite robotics controller. This kit includes all of the parts needed to assemble the chassis as well as a 4xAA battery holder with barrel jack termination.

Note: The chassis requires assembly but has detailed instructions.

Dimensions: 110 x 174mm

Features:

• Max Motor Voltage: 6VDC
• No Load Speed: 90±10rpm
• No Load Current:190mA(max.250mA)
• Torque: 800gf.cm
• Stall Current: ~1A
• 65mm Diameter Wheels (30mm Wide)
• Plastic Rims with Solid Rubber Tires
• Dual Output Shafts
• Wheel Encoder Boards Included

Description:

This is the same product as the XBee Shield with a multitude of extra parts including 2 XBee modules, the popular XBee Explorer, and headers for the shield. All these parts comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.

Our entire goal for the XBee Kit was to make wireless communication simple. Connect one XBee to the shield and your Arduino, connect the other XBee to the Explorer board and your computer, and you’ll be able to seamlessly pass serial data to and from your Arduino wirelessly! Using this connection, you can transmit remote sensor data, or send data from your computer to update a scoreboard, or drive a robot from your keyboard!

Description:

The X-TERRA 305 is the solid no-nonsense introduction to the new generation Minelab X-TERRA Series. A lightweight, easy to use, coin and treasure-hunting detector designed for the hobbyist who does not want or need the top of the range machine. The X-TERRA 305 is suitable for the whole family and there is even a short shaft available for keen youngsters. Despite being ultra lightweight and so easy to use there is no compromise on quality or performance - Minelab’s designers used innovative, lateral thinking and the very latest in digital components to design the X-TERRA Series of detectors.

The X-TERRA 305 is now packed with new features, functionality and enhanced setting options. This detector delivers results, value and more…in fact some might think that we made it too good!!! A no nonsense detector perfect for those seeking a high performance entry-level detector.

Description:

Once upon a time, a genius named Leon created the Theremin - what many consider to be the world's first electronic instrument. It was so awesome, he changed his last name to Theremin. The Theremin's awesomeness spanned time and space and enthralled another genius named Bob Moog. This is Moog's Theremin pumped up to the next level. With tears of happiness in our eyes, we present to you the Moog Theremini Professional Theremin.

The Theremini is so friggin' awesome, we don't have room to fully describe it all (check out the Details & Specs tab for a full list), but we're gonna hit the highlights. First, it's got a powerful sound engine derived from Moog’s award winning synthesizer: Animoog. Second, and this is a first for Theremins, the Theremini has assistive pitch quantization, which allows you to adjust the instrument's level of playing difficulty. At the maximum position, the Theremini will play every note in a selected scale perfectly, making it impossible to play a wrong note. As this control is decreased, more expressive control of pitch and vibrato becomes possible. The Theremini is a dream to play, a marvel to compose with, and a work of art to look upon. If you've ever wanted to play the Theremin, the Moog Theremini Professional Theremin is the best place you could ever hope to start. We'd write more, but our Theremini is calling to us and our hands need to dance again!

Description:

We're gonna keep this one brief, as there are a lot of tech specs to look at. If you're like us, you have a bad case of the "if only it did this" (also known as "if only these buttons were in a slightly different place"). We're especially like that with MIDI interfaces - because only we know what we need. Well, now we can build exactly the interface we need with theseBrain DIY MIDI Control Interface Kits. Each kit gives you the brains and parts needed to build just what you want. Then, DIY an awesome enclosure and make THAT look just like what you want, too. Ok, so that's it in brief - now for the Brain DIY MIDI Control Interface Kits tech specs.

Note: Brain Jr. shown in the main picture.

Brain DIY MIDI Control Interface Kits

• The brains behind your very own custom MIDI device.
• Easily configure and create a MIDI control device using modular circuit boards that can be organized and arranged into customized setups and configurations.
• Design your own physical computing devices and MIDI control surfaces using buttons, knobs, encoders, velocity pads, arcade buttons, accelerometers, faders, other sensors, and talkback LEDs.
• Enclosures not included - you get to DIY your own (some examples shown to get your imagination flowing).
• Perfect for studio or performance devices.
• Each kit gives you everything you need to build a MIDI controller.
• Made by the geniuses at Livid Instruments.
• Brain Jr.
• Features:
• 16 digital connections (switches, buttons, etc.)
• 16 analog connection (faders, potentiometers, sensors)
• 16 LED connections (monochrome and RGB)
• USB connectivity (cable not included)
• Class compliant, no drivers needed

Description:

We love the sweet bleeping sound of electronic music. One of our favorite pioneers is Raymond Scott (and if that name doesn't mean anything to you, shame on you and look him up). Apart from his awesome musical output, his inventions reign supreme as some of the coolest things ever created (if only he wouldn't have been so secretive). When we first heard the Nebulophone, it sounded like a bunch of Scott's inventions all crammed into one. Into one easy-to-build, DIY kit, we could love and share with you. So we did.

The Nebulophone is freakin' awesome and really fun to play. It's sort of like a Stylophone on crack - you use a stylus to play a note - but that's about where the similarities end. The Nebulophone has all sorts of fun buttons and dials to alter the waveform; adjust decay, portamento, keyboard mapping, and arpeggiation; and so much more. Plus it's got a light controlled analog low-pass filter (adjustable, naturally) that adds even more fun. Our first song created on the Nebulophone is called, "Ty's Goatee" - what's yours? Get a Nebulophone today, enjoy assembling it tomorrow, and begin rocking out the day after. The Nebulophone - so much bleeping fun.

IMPORTANT NOTE
This is a KIT. Which means that you have to assemble it... which is the way kits typically work. You will need some simple soldering skillz and a screwdriver.

Nebulophone Mini Arduino Synthesizer

• The Nebulophone is an Arduino based synth with a stylus keyboard that you build yourself.
• Five waveforms (ramp, triangle, square, pulse, and noise).
• Adjustable decay.
• Light controlled analog low-pass filter with five adjustable LFO LED modes.
• Four arpeggio modes with adjustable rate.
• Portamento with three speed settings.
• Pitch range and keyboard temperament controls. Switch between major and chromatic keyboard mapping.
• Hypernoise 3000 mode.

Description:

After our first snow of the year here at ThinkGeek World Domination HQ, this copywriter's vehicle only seats 3 comfortably, because the backseat also is now home to the shovel, broom, and ice scraper. It's just easier to keep them all back there than to cart them into the house, only to have to cart them back out at the next chance of snow.

So we were pretty excited when we met Zeus. Not the Zeus from Mount Olympus. This other Zeus from Quirky. It's a multitool for vehicle cleaning, sort of like having a Swiss Army Knife dedicated to snowfall. It's a shovel, brush, and ice scraper ALL IN ONE. This makes us (and the person currently wedged into the back seat with the shovel, broom, and ice scraper) very happy.

Made from high-impact plastic, the shovel head flips over to become an oversized ice scraper we can't wait to try the next time it snows. A brush fits neatly into the extendable handle, which is steel where it counts and aluminum where it doesn't to lessen the tool's overall weight. Plus, the grip has reflective ends to help keep you visible while digging out.

Knowing Quirky, we assume v2.0 will be wi-fi enabled and will tell you whether or not your local grocery store is out of milk and toilet paper (spoiler alert: it is).

Product Specifications

• Zeus is a multi-tool (shovel, brush, and ice scraper) for wintry situations
• Wide shovel with ergonomic handle for serious snow removal
• Removable handle doubles as a brush for clearing snow
• Handle also features reflective ends for additional safety
• All features break down neatly for compact storage

Description:

Ever been at a concert or festival in the dark and had trouble meeting up with your friends? Everyone gives vague descriptions of where to meet: "By the guy with the cowboy hat and the glow sticks," or "to the left of the stage, halfway back," or "by the hula girl who is hooping by the beer cart." All of the really experienced and wise festival goers know to bring in something to help everyone from your group be able to find you. Your new best friend F.R.E.D. is just the ticket. The flashing roadside emergency disk features 9 different flashing flare modes, so your friends can spot you from up to a mile away!

It also has many other more practical uses as well including in emergencies, camping, as a road flare, on your favorite sea-faring vessel, and more. A push of the button rotates the user through all of the light's functions. Plus, this light was built to last. It can float and withstand up to 10,000 lb of weight.

Product Specifications

• Compact light for signaling or emergencies
• Features 3-LED white worklights and 9 different red flare modes
• Magnetic back for hands free use or mounting
• Fold out hook for hanging in a tent, on a car hood latch, etc.
• Multiple lighting and mounting options make FRED perfect for:
  • Road travel
  • Camping
  • Concerts
  • Auto or home repair
  • Marking hazardous areas
  • Marking points of interest
  • Bug Out Bags
  • and much much more

Description:

CHARGE ALL THE THINGS!

There are never enough outlets. Even in modern houses, which have been designed knowing that humans today rely on electricity, we still end up with a power strip in every outlet. We're just glad the wiring was set up well so we don't trip a breaker every time we turn the TV on.

One place we don't think of as needing more outlets: the automobile. But as soon as we said that, you thought, "Oh wait. I could totally use more outlets in my vehicle," right? We generally think of the cigarette lighter socket as a one-to-one relationship or, more recently, one-to-multi-USBs relationship. What if we told you it could be one-to-many, both USB and AC? The Smart AC Power Strip lets you power both your smartphone and your laptop from your car, truck, boat, or RV. Plug it into the cigarette lighter socket, and take advantage of its 2 USB power ports or 2 AC outlets. No more "Are we there yet?" from the backseat when you can recharge their distractions on the go.

Product Specifications

• Inverter plugs into your cigarette lighter socket and provides both USB and AC outlets
• 2 USB power ports: charge and run your mobile phones, tablets, e-readers, and other electronics
• 2 AC outlets: Power laptops, DVD players, game consoles, digital cameras, and more
• Great to have around during power outages
• Safety features: Over-voltage, overload, short-circuit, high-temperature protection, and low voltage shut-off
• Continuous Power: 120 W
• Peak Surge Power: 200 W
• DC Input Voltage: 10 V to 15 V
• AC Output: 115 +/-5 V AC, 60 Hz
• AC Output Waveform: modified sine wave
• USB Output: 5 V, 3.1 A total

Description:

NO NEED TO GO TO TOSCHE STATION

Shipping restrictions: We cannot ship this item outside of the U.S. and Canada

R2 units: is there anything those little guys can't do? While we don't yet have the technology in this quadrant of the galaxy for fully-automated repair droids like the R2 units from Star Wars, we can get a portion of the R2's versatility into something small enough to sit in your vehicle's cupholder.

You see, it makes R2-D2 whistle sadly when he sees a device that's run out of power. Make him bloop and bleep happily again by letting him use your vehicle's power to recharge your devices. With him plugged into your 12V vehicle power adapter (cigarette lighter), you can get 2.1 Amps through each of his USB charging ports, which is enough to charge two tablets or smartphones or, well, pretty much anything that charges via USB. What's that, little guy? He says, "Bloop bloop bleep," which we think means "Yay!"

Product Specifications

• R2-D2 USB Car Charger
• A ThinkGeek creation and exclusive!
• Officially-licensed Star Wars merchandise
• Compatible with anything that charges via USB (iPhones, smartphones, iPads, tablets, GPSes, etc.) as long as you have the cable
• Two (2) USB charging ports
• Each port provides 2.1 Amps (enough to charge 2 tablets simultaneously)
• R2-D2's dome rotates and lights up; he whistles and beeps (when power is connected and when your device begins to charge; force him to animate by pressing his center button which turns power to the ports on; sounds cannot be turned off)

Description:

As geeks, we find Las Vegas to be a fascinating city. For starters, we get to indulge our picky eating habits at giant buffets. Then we can observe legions of people at the slot machines, blissfully and willfully ignorant of the laws of probability. We can collect trading cards from those nice guys in neon t-shirts. (We're sure it's a TCG.) Outside of Treasure Island, we can watch a show about pirates that involves fire and explosions. Then it's off to our favorite casino for some Texas Hold 'Em.

If your trip to Vegas isn't complete without the fountain show at the Bellagio, our Light Show Fountain Speakers are relevant to your interests. Plug them into your iPod, mp3 player, or computer via the included USB cable and start up your tunes: the water inside will dance to the beat and the 4 multi-colored LEDs will light up. Take your tunes to a new level with the Light Show Fountain Speakers and your wallet to a whole new high since you won't need to go to Vegas for a fun fountain show.

Product Specifications

• Let your music dance before your eyes
• Plug your iPod, mp3 player or computer in and start the music
• Water bounces to the beat
• Multi-colored LEDs light up the water
• Comes with water inside and is sealed tight
• Looks great in the dark
• Added Bonus: Awesome reflection on the ceiling. Make sure you look up
• USB cable included
• Compatibility: If you can plug it in via USB, it'll work!
• Power: 5v USB (can be plugged into a smartphone/tablet charger)
• Dimensions: 9 inches tall

Description:

Product Specifications

• Macro lens for your iPhone or Android phone
• Fits phones devices from the super-slim 4th Gen iPod Touch all the way up to a 10" iPad or Android tablet and everything in between
• Provides up to 4x magnification, improving your camera's close-up photos
• For photographers, Instagram enthusiasts and everyone in between
• Extend the stretchy "rubber band" over your phone, line up the lens, and go!
• Comes with a credit card for easy wallet storage when not in use

Description:

GREAT SCOTT!! Marty has travelled back in time and taken the Flux Capacitor with him. We're not exactly sure where, so Doc Brown has authorized us to make these smaller Flux Capacitors to you so we can crowd-search time for Marty. Each one is capable of returning to a specific point in time, so you can join the search. Just plug it into your car's 12V vehicle power adapter (cigarette lighter) and turn it on. 88mph and . . . ok, don't go that fast. That would be bad, because the Flux Capacitor Car Chargerwon't really take you through time - but it will charge all your USB-powered goodies.

Each Flux Capacitor Car Charger has two USB ports, each capable of charging almost any USB powered device (1 x 1A and 1 x 2.1A). But it also has that beautiful Flux Capacitor light sequence we all know and love. Even traffic jams (either terrestrial or aerial (if your car is powered by Mr. Fusion)) won't bother you because your device will be charging and the Flux Capacitor Car Charger's pulse will make you feel more important than anyone else. It's time to write your name in your underwear, Calvin, and get yourself a Flux Capacitor Car Charger in the present (so you can enjoy it in the future).

Flux Capacitor Car Charger

• A ThinkGeek creation and exclusive!
• Officially-licensed Back to the Future merchandise.
• Compatible with anything that charges via USB (iPhones, smartphones, iPads, tablets, GPSes, etc.) as long as you have the cable.
• Two USB charging ports: 1 x 1A and 1 x 2.1A
• On/Off switch for Flux lighting effect.
• Flux Capacitor fluxes in its famous light pattern as it charges your goodies.
• Flexible arm pivots up and down so you can better customize it to best fit your vehicle's power port placement.
• Includes: Flux Capacitor unit with 2 USB ports and integrated 12V vehicle power adapter (cigarette lighter).

Description:

If there is one thing the Doctor hates, it's missing a call on his cell phone. And sometimes, he's in a place where he has to be very quiet and sneak about so he doesn't get seen. Lucky for him, then, that whilst traveling the universe he found a little shop selling baby Daleks and Cybermen - really tiny, pocket-sized Daleks and Cybermen. They were too small to cause any harm, but they did have one curious feature. When exposed to certain frequencies, they would spin in a circle and cause random lights to flash. The good Doctor knew he had a powerful tool at his disposal so he bought a ton of the little creatures and disappeared into his workshop. When he emerged, he had invented the Dalek Cell Phone Alert Charm. Later, by popular demand of folks who were a little creeped out by Daleks and Cybermen, he used the same technology to reproduce his trusty vehicle, the TARDIS.

Just hang one off your jacket, computer bag, navel ring, etc., and any time you get a call on your cell phone, your very own Dalek, Cyberman, or TARDIS will spin around and little lights will flash near its base. It's just that simple. So, anytime you have to leave your cell phone on "silent," just watch your charm to see if you have an incoming call. 'But hey,' you are wondering, 'Didn't you just say the Doctor invented these things? Then how did ThinkGeek get them to sell to me?' Let's just say we have friends all over the universe...

Description:

Getting the right kind of party started is hard. You've got to have somebody who's going to be your Tank, somebody who's willing to heal everybody, somebody who can do some ranged damage, somebody who... what? Oh the OTHER kind of party? Well, heck, getting that kind of party started is easy.

Bring the party with you wherever you go with the PartyStarter Bluetooth Speaker with Synchronized Lights. This little speaker delivers big powerful sound through your iPad, iPod, iPhone, or Android device's Bluetooth Function. But here's where the party starts: built-in technology projects colorful lights onto the walls and ceiling that is synchronized with the beat. Oontz oontz!

Product Specifications

• PartyStarter Bluetooth Speaker with Synchronized Lights
• Compatible with any Bluetooth-enabled device, including iPhones, iPads, iPods, and Android phones and tablets
• Compact speaker projects party lights onto walls and ceiling
• Has standard 1/8" aux input
• Batteries: Rechargeable 3.7v/500mAh (~1.5 hours with light, ~3 hours of just music)
• Recharges via mini USB, cable included (recharging takes 3 hours)
• Note: PartyStarter lights must be powered off to charge
• Includes speaker, mini USB Cable, Quickstart Guide, and Safety & Warranty Manual
• Dimensions: 2 1/2" diameter, 4 1/4" tall
• Weight: 6 1/2 oz.

Description:

Once upon a time, in the early 1990s the coolest piece of technology that you owned was your Nintendo Entertainment System. Your hands and thumbs knew every curve and angle of its classic controller. But then you upgraded. You said goodbye to your loyal NES controller and moved on to the next big thing. To this day, you dream about someday seeing that controller again... and this time, never letting go.

Now you can welcome that classic NES controller back into your life by dressing up your newest special technology to look just like your first love with this NES Controller Case for iPhone 5. Featuring a joypad, start, select, and "A" and "B" buttons.

Product Specifications

• iPhone 5 case design to look like NES Controller
• Compatible with iPhone 5/5S
• Case features press-able, but non-functional controller buttons
• All ports and buttons are accessible
• Materials: Silicone buttons, hard plastic case

Description:

The NVIDIA SHIELD wireless controller works seamlessly with your SHIELD tablet and SHIELD portable for exceptional responsiveness and immersion in today's hottest games. This is the first-ever precision controller designed for both Android and PC streaming. Take on next-generation Android games like Rochard and The Walking Dead and immerse yourself in streaming PC blockbusters like Titanfall - all from the comfort of your couch.

The NVIDIA SHIELD wireless controller is ergonomically designed for maximum performance and comfort. Boost your gaming performance with ultra-low latency Wi-Fi connectivity. Plug your favorite gaming headset into the NVIDIA SHIELD wireless controller and enjoy high-fidelity stereo audio and voice chat for online gaming with friends. Plus, it has a volume rocker for easy and quick audio control! The NVIDIA SHIELD wireless controller also features a clickable capacitive touch pad and dedicated Android Home and Back buttons make navigating through Android a breeze. The NVIDIA SHIELD wireless controller is the controller of your dreams!

Product Specifications

• Precision Controller Designed for Android and PC Gaming
• Wi-Fi Direct Connectivity for Game-Speed Performance
• Stereo Headset Jack with Game Chat Support
• Integrated Microphone for Voice Search and Commands
• Compatible with NVIDIA SHIELD Tablet and SHIELD Portable
• Wireless: Wi-Fi Direct wireless connectivity
• Audio: Built-in stereo headphone jack and microphone
• Connectivity:
• Micro-USB 2.0 for charging or wired gameplay (USB cable included)
• 3.5 mm stereo headphone jack with voice chat support
• Input controls
• Dual analog joysticks
• D-pad
• Left/right analog triggers
• Left/right bumpers
• A/B/X/Y buttons
• Volume +/- buttons
• Android Home and Back buttons
• Start button
• NVIDIA power/multi-function button
• Capacitive touch pad with button
• Battery: Rechargeable battery

Description:

Sometimes, when you're barreling down the highways of life, you just have to reach out your voice into the darkness and see who's there - to let the faceless void fill with your words and thoughts and peek into your soul for a time. Why? Because that's what truckers do. They do it with CB radios, just like TV and movies of the 80s taught us. Well, the 80s are in our past, but the tech has been adapted for our present. Presenting, the CB Radio iPhone Handset.

The CB Radio iPhone Handset is just a lot of fun. Plug it into your iPhone (or any smart phone with a 3.5mm headphone jack) and get ready for loads of retro fun. A dial on the side turns the unit on and pumps up the volume, it's got a belt clip, blah blah blah. But the real joy of the CB Radio iPhone Handset is the mute button. All it does is mute the other side of the conversation, but what it really does is make the experience all the more like a real one-way CB dialog. The CB Radio iPhone Handset is great for whenever you want to talk to your good buddy and feel like the cubicle trucker you are.

CB Radio iPhone Handset

• Looks just like you ripped it off an old CB radio.
• Microphone integrated into cord for better sound pickup.
• Features:
• Answer and Hang Up button.
• Volume Control and Power On/Off dial.
• Mute Button - mutes the other side to feel more like a real one-way CB radio.
• Belt Clip.
• Handset works as just a speaker, too!
• Works with any smart phone with a 3.5mm earphone jack including the iPhone 5 (Answer and Hang Up button, however, will only work on phones with this function).
• Batteries: 2 AAA (not included)

Description:

• Play your favorite mobile games with a real controller
• Wireless Bluetooth controller for Android and iOS
• Features:
  • Four operation modes for Android: Mouse, Keyboard, Mouse/Keyboard and Joystick for a maximum of compatibility with Android games
  • Two operation modes for iOS: iCade and Keyboard
  • Turbo fire
  • 2 analog thumbsticks
  • Digital directional pad
  • 6 digital buttons
  • 2 analog triggers
• Ergonomic design for relaxed gaming
• Batteries: Rechargeable Li-Ion battery + USB charging cable (2m)
• Compatibility: Android 3.2 or highter, iOS
• Games Compatibility

Description:

Remember when you were promised all those amazing future tech innovations? Just around the corner was supposed to be a shining technology utopia with flying cars, personal space travel to distant galaxies, and bio-implantable cell phones. It's almost disappointing enough to make you sit at home and watch old episodes of "Space 1999".

Don't lose hope! An amazing glimpse of this promised future has just arrived at ThinkGeek in the form of the Epic - Bluetooth Virtual Keyboard. This tiny device laser-projects a keyboard on any flat, opaque surface. You can then type away accompanied by simulated key click sounds. It really is true future magic at its best. You'll be turning heads the moment you pull it from your pocket and use it to compose an e-mail on your iPad, iPhone, smartphone, tablet, or laptop. With 68 keys and and full-size QWERTY layout, the Epic - Bluetooth Virtual Keyboard lets you type up to 350 characters per minute using a device a little larger than a matchbox.

Description:

We all have our clumsy moments (some of us more than most). You drop your phone and hear the ominous sound the screen makes as it hits the floor and the glass snaps. And then your wallet also makes an ominous sound, because it's going to cost you upwards of $150 to get that repaired. It happens; now you've got to deal with it.

Only you don't, because it's not real. It's a sticker. Yep. Meet the iPrank Cracked Screen Sticker Pack. It's better than some app that shows ads or a wallpaper that shows your icons on top of the spiderweb pattern instead of behind. It's a set of 6 screen protectors that look like you've broken your screen: 2 for iPhone 5, 2 for iPhone 4, and 2 for iPad. Know what that means? You can prank six of your friends. Or maybe you want to use them as your normal screen protector so you can leave your phone someplace and people are less likely to walk away with it. Going someplace where you have to check your phone? This is a nice touch. Sort of like a valet key for your phone.

Description:

TINY USB 3.0

We always like to have a USB drive on us at all times. You never know when there's a file you need/want to grab/share. But with all the different styles out there, we wanted to find some that performed the best AND looked good. The Leef Supra USB 3.0 Drive is one of the smallest USB 3.0 drives available, and we have a thing for tiny powerful things. Leef Supra USB 3.0 Drives are a great way to increase your storage without increasing your laptop/tablet/whatever's footprint.

Product Specifications

• Leef Supra 3.0 is one of the smallest 3.0 USB Flash drives available
• Available in 3 sizes: 16GB, 32GB, or 64GB
• Built with Leef's PrimeGrade Memory which is waterproof, shockproof, and dust proof
• Soft-glow LED
• USB Standard: High-speed USB 3.0 Compliant, USB 2.0 Backwards Compatible
• USB 3.0 transfers data up to 10 times faster than USB 2.0.
• Operating Temperature: 0°C - 70°C
• Storage Temperature: -25°C - 85°C
• System Requirements: Windows 8, Windows 7, Windows XP (SP3), Windows Vista (SP1, SP2), Windows 2000, Apple Mac OS X or later
• Dimensions: approx. 0.6" x 0.9" x 0.3

Description:

BECAUSE NOT ALL USB PORTS WERE CREATED EQUAL

Fifteen minutes before you have to leave the house, you realize your phone's battery is almost dead. You plug it up right away, but how do you know where to plug it to get the maximum juice in the minimum time? Laptop? Wall? USB hub? Instead of guessing, be sure with the Power Practical Meter.

You see, one of the problems is that there are different standards for putting a full 5-watts into a USB device. The Practical Power Meter fits inline with any USB port. 5 LEDs on the front cover the range of phone charging possibilities, in 1 watt intervals, rounding up. A red LED indicator lets you monitor over 5 watts of throughput to your larger devices like iPads and tablets.

Yes, yes. Knowledge is power, but doing something with the knowledge is what counts. What if you knew you could be charging at 5 watts, but the Practical Meter indicates you've encountered a 2.5 watt limiter on your charging port or the cable itself? That's where the Fast Charge 3-in-1 Cable comes in. It has a built-in circuit that lets you override the limiter. At a 2 amp maximum, it comes with adapters for 30-pin (all iPhone 4S & earlier, iPad 3rd gen & earlier, iPods made before 2012), USB Micro (most Android devices), and USB Mini (GoPro, Motorola). Have an iPhone 5 or other Lightning connector device? Use your practical meter to see which of your cables are actually giving you the juice you need

Description:

BEAUTY AND SPEED.

We always like to have a USB drive on us at all times. You never know when there's a file you need/want to grab/share. But with all the different styles out there, we wanted to find some that performed the best AND looked good. Behold, the Leef Ice USB 3.0 Drives. They are shockproof, waterproof, and dust proof. That makes our data happy. Leef Ice USB 3.0 Drives look really nice on our keychain, too! And that makes us happy.

Product Specifications

• Leef Ice Drives are designed with an anodized aluminum band and methacrylic resin base, for a unique look
• Available in 2 colors (Black or Copper) and 3 sizes (16GB, 32GB, or 64GB)
• Built with Leef's PrimeGrade Memory which is waterproof, shockproof, and dust proof
• Soft-glow LED
• USB Standard: High-speed USB 3.0 Compliant, USB 2.0 Backwards Compatible
• USB 3.0 transfers data up to 10 times faster than USB 2.0.
• Operating Temperature: 0°C - 70°C
• Storage Temperature: -20°C - 85°C
• System Requirements: Windows 8, Windows 7, Windows XP (SP3), Windows Vista (SP1, SP2), Windows 2000, Apple Mac OS X or later
• Dimensions: approx. 0.6" x 1.4" x 0.3"

Description:

Checking emails, brewing a cup of Dagobah Green Tea, hanging up your collection of ThinkGeek t-shirts, putting on Wild Cherry Pepsi lip balm, using PorkKleen Hand Sanitizer to protect yourself from germs, refilling your red Swingline stapler, eating Tribbles n'Bits cereal, reading the newspaper... everything is cooler through a fisheye lens.

But the Olloclip doesn't stop with just a fisheye lens. Compatible with the iPhone 5 and 5S, the Olloclip is a quick-connect lens system that includes fisheye, wide-angle, and 2 macro lenses in a tiny and convenient package. It was a huge hit on Kickstarter, where the project blew past its $15k production costs goal and ended up raising a whopping $68,201.