Murata adds 1300W model to AC/DC family 2014
Description:
Murata has expanded its D1U3CS family of front end AC/DC power supply products to include a 1300W model.
The new device is designed to deliver 1,300W from a 108 to 264VAC universal input. It is hot pluggable, has no minimum load requirement and incorporates low loss integral ORing Field Effect Transistors (FETs) on its main 12V output, for fault tolerant and N+1 redundant applications.
With a power density of 23W per cubic inch, the power supply can achieve a high typical conversion efficiency of 92% at half full load.
The D1U3CS-W-1300F has a primary 12VDC output and an optional auxiliary output of either 3.3 or 5VDC for powering standby circuitry. Active power factor correction is used to minimise input harmonic current distortion and ensure compliance with the IEC61000-3-2 standard, with a power factor of 0.99 typical. It accepts the universally available IEC C14 AC input power connector.
With a power density of 23W per cubic inch, the power supply can achieve a high typical conversion efficiency of 92% at half full load.
The D1U3CS-W-1300F has a primary 12VDC output and an optional auxiliary output of either 3.3 or 5VDC for powering standby circuitry. Active power factor correction is used to minimise input harmonic current distortion and ensure compliance with the IEC61000-3-2 standard, with a power factor of 0.99 typical. It accepts the universally available IEC C14 AC input power connector.
