0

EBMC Series Explosionproof Combination Motor Starters 2014

Posted by Mohammad Ajmal on 8:20 AM
cch_c_ebmc_220.jpg
Description:


Rugged, corrosion resistant, cast copper-free aluminum construction (less than 0.4 of 1%)
Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
Total compliance to the wiring end room requirements of the National Electrical Code® / Canadian Electrical Code
Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
Stainless steel hinges allow the cover to swing well out of the way
Stainless steel, quick release, captive, hex head cover bolts; stainless steel springs provide clear indication cover bolts are fully retracted from body
Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' starters and breakers
Simple, straightforward installation of breaker and starter on pre-drilled mounting plate within enclosure; mounting plate also field removable
Circuit breaker motor circuit protector external operating handle can be padlocked in either "ON" or "OFF" positions
Neoprene cover gasket permanently attached to the cover seals out moisture
Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit; removable reducers are supplied, as standard, to accommodate smaller size conduits; all conduit entrances are plugged
Tap-on mounting feet
Optional EMPS control devices may be added to enclosure cover
Steel bracket for lifting larger enclosures during installation supplied as standard.

0 Comments

Post a Comment

Copyright © 2009 Latest Electronic Products All rights reserved. Theme by Laptop Geek. | Bloggerized by FalconHive.